Inline Bubble Trap — 300 µL, PEEK, Standard
Vents free gas and air bubbles out of a flowing liquid line without interrupting flow. Bubbles rise to a hydrophobic 10 µm PTFE membrane and escape to atmosphere — passively, or faster with vacuum on the dry side. Removes free bubbles only, not dissolved gases.
 
Best for: higher-flow systems, HPLC lines and heavy bubble loads. Pair with a vacuum pump above ~10 mL/min.
 
Specifications
Internal volume — 300 µL
Materials — PEEK body, 10 µm PTFE membrane installed, autoclavable
Ports — 1/4"-28 UNF, inlet and outlet interchangeable
Vacuum — to −14.5 psi
Base — Standard — round, no mounting holes; fluidics identical to EZMount
Chemical compatibility — most organic solvents; verify for your solvent
 
⚠️ Mount it vertically — both fluid ports at the lowest point, air vent facing up. Bubbles can only reach the membrane if they can rise to it. Horizontal or vent-down mounting is the most common reason a trap seems not to work.
 
Not included: fittings and tubing — see flangeless fittings 1/4"-28, PTFE tubing, Luer adapters.

Replacement membranes: 10 µm PTFE, 5/pk — non-sterile or sterile.
 
In stock in San Jose, CA · ships in 1–2 business days · international shipping available.