Mini Microfluidic Pump
PreciGenome PG-MP pressure/vacuum pump is a micro diaphragm pump. When integrated with a high accuracy pressure controller, it enables the generation and accurate control of pressure into microfluidic chips without compressed gas lines or gas compressors.
It provides both positive pressure and vacuum output via the ports at the rear panel. The pressure/vacuum can be easily adjusted using the front panel knob.
System Benefits:
-
Compact and portable design
-
Adjustable pressure/vacuum output
-
Easy connection
-
No external computer required
-
OEM service and module integration available
System Specifications:
-
Repeatability: below 1% of the measured value
-
Output range -40kPa - 80kPa (~ -5.8 to 11.6 psi) ( max pressure range when air flow rate is zero)
-
Lifetime 1000 hours
-
Size: 10cm * 5cm *4cm
-
Air flow rate >= 1.1L/min
-
Media: Air, Argon, Helium, Nitrogen, Oxygen, and other non-reacting gases
-
Noise Level : As low as 45 dB @ 12 in (30 cm)
-
Operating Environment: 5 to 50℃
-
Humidity: 0–90% Relative Humidity
Application:
-
Pressure/vacuum supply to high precision pressure/flow controller (e.g. iFlow controllers)
-
Cell culture and cell perfusion
-
Droplet generation and applications
-
Organic/polymer syntheses
-
Automatic reagent distribution
-
Organ on a chip
-
Nanoparticle synthesis
-
Bead and particle manipulation
-
Degassing with bubble trap
-
Other microfluidic applications to manipulate fluids
Application Examples:
Pressure/Vacuum Supplier
Pressure/vacuum supplier to high precision pressure/flow controller (e.g. iFlow controllers)
Vacuum source for bubble removing
In active mode, the bubble trap connects a vacuum source at the vacuum line to maximize the removal efficiency.
