Inline Bubble Trap — 300 µL, PEEK, Standard, sterile
Vents free gas and air bubbles out of a flowing liquid line without interrupting flow. Bubbles rise to a hydrophobic 10 µm PTFE membrane and escape to atmosphere — passively, or faster with vacuum on the dry side. Removes free bubbles only, not dissolved gases.
 
🌱 Supplied sterile. Autoclaved and sealed in a sterilization pouch with a Class 5 process integrator; re-autoclavable. Not supplied to a validated sterility assurance level — validate for your application. Not sterile if the pouch is open, damaged or wet.
 
Best for: sterile higher-flow work and heavy bubble loads — recirculating perfusion loops, bioreactor and harvest lines. Pair with a vacuum pump above ~10 mL/min.
 
Specifications
Internal volume — 300 µL
Materials — PEEK body, 10 µm PTFE membrane installed, autoclavable
Ports — 1/4"-28 UNF, inlet and outlet interchangeable
Vacuum — to −14.5 psi
Base — Standard — round, no mounting holes; fluidics identical to EZMount
Chemical compatibility — most organic solvents; verify for your solvent
 
⚠️ Mount it vertically — both fluid ports at the lowest point, air vent facing up. Bubbles can only reach the membrane if they can rise to it. Horizontal or vent-down mounting is the most common reason a trap seems not to work.
 
Not included: fittings and tubing — see flangeless fittings 1/4"-28, PTFE tubing, Luer adapters.

Replacement membranes: 10 µm PTFE, 5/pk — non-sterile or sterile.
 
Made to order — allow extra time beyond our standard 1–2 business day dispatch; contact us for the current lead time. International shipping available.