iFlow Droplet Generation System PG-DG with droplet generator chips can be used for the rapid preparation of water-in-oil or oil-in-water droplets. It generates droplets stable, fast and effectively. The droplets are highly uniform in diameter (CV 0.1-5%). The number and diameter of the droplets can be adjusted according to users’ requirements. The size of the generated droplets is mainly controlled by the channels' geometry, the flow rate ratio of two phases, interfacial tension, etc.
 
System Contents:​
​​​PG-MF controller, 8ch (optional 4ch), 1pc
Microfluidic reservoir kit, 15ml, 2sets
Reservoir tube racks, 2pcs
Droplet generation chips, 2pcs
Tubing & connectors kit, 1set
Liquid flow sensor (optional)
High-speed imaging system with illuminations (optional)
 
​​​ ​Key specs:
Pressure sensor accuracy of ±0.25 %FSS BFSL (Full-Scale Span Best Fit Straight Line), sensor resolution: 0.0061 %
Pressure stability: 0.05 %
Flow rate repeatability: below 1% of the measured value
Highest sensitivity down to <1 µl/min
Maximum flow rate for water-based liquids: 10 ml/min;
​Maximum flow rate for hydrocarbons: 80 ml/min​
 
​​​ ​Applications:
Droplets generation and applications (ddPCR, single-cell encapsulation, NGS target sample enrichment, RNA Seq, etc.）
Organic /polymer syntheses Drug transportation
Automatic reagent distribution
Cell culture, cell perfusion, and sequential injection of reagents
Microfluidics & organs on chip
Instrumentation for point of care testing
Other microfluidics applications to manipulate fluids