iFlow Droplet Generation System PG-DG with droplet generator chips can be used for the rapid preparation of water-in-oil or oil-in-water droplets. It generates droplets stable, fast and effectively. The droplets are highly uniform in diameter (CV 0.1-5%). The number and diameter of the droplets can be adjusted according to users’ requirements. The size of the generated droplets is mainly controlled by the channels' geometry, the flow rate ratio of two phases, interfacial tension, etc.
System Contents:
- Controller, 1pc
- Reservoir kit, 2sets
- Droplet generation chips, 1 set
- Tubing & connectors kit, 1 set
- Liquid flow sensor (optional)
- High-speed imaging system with illuminations (optional)
Key specs:
Pressure sensor accuracy of ±0.25 %FSS BFSL (Full-Scale Span Best Fit Straight Line), sensor resolution: 0.0061 %
Pressure stability: 0.05 %
Flow rate repeatability: below 1% of the measured value
Contactless flow rate control
Output range per run: 10mL to 2L
Continuous production mode is supported (optional)
Applications:
Droplets generation and applications (ddPCR, single-cell encapsulation, NGS target sample enrichment, RNA Seq, etc.)
Organic /polymer syntheses Drug transportation
Automatic reagent distribution
Cell culture, cell perfusion, and sequential injection of reagents
Microfluidics & organs on chip
Instrumentation for point of care testing
Other microfluidics applications to manipulate fluids
iFlow Droplet Generator, Large Scale High Throughput Output
Request a Quote
Related Products